- You are here:
-
Home -
-
Soil Warming Cables
Soil Warming Cables
A convenient way to heat the soil in greenhouse or propagator, thus enabling you to make an early start with your seedlings. It is recommended that the spacing of the runs for the cable, should be laid in 4" (100mm) gaps, (as shown in the picture). Available in various lengths.
-
Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Length 3 metres, co (continues...)
Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Completely safe in operation, simply fit a standard plug. Adhere to electrical safety procedures. The area of coverage will be between 0.30 to 0.45 square metres.
For a hotbed: 69 - 95 Watts/sq.m. of heating will raise the temperature by 5 - 8 deg C. For a propagator: 95 - 130 Watts/sq.m will raise it by 8 - 11deg C.
Details and Ordering
£20.00 - MRP: £35.25
- Saving You: £15.25
-
OUT OF STOCK 16/4/22 Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
(continues...)
Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Completely safe in operation, simply fit a standard plug. (Adhere to electrical safety procedures) The area of coverage will be between 0.55 to 1.11 square metres.
For a hotbed: 69 - 95 Watts/sq.m. of heating will raise the temperature by 5 - 8 deg C. For a propagator: 95 - 130 Watts/sq.m will raise it by 8 - 11 deg C
Details and Ordering
£33.25
-
OUT OF STOCK -Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Length (continues...)
Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Completely safe in operation, simply fit a standard plug. Adhere to electrical safety procedures. The area of coverage will be between 1.39 to 2.22 square metres
For a hotbed 69 - 95 Watts/sq.m. of heating will raise the temperature by 5 - 8 deg C For a propagator95 - 130 Watts/sq.m will raise it by 8 - 11deg C. For additional temperature control use with a thermostatic controller.
Details and Ordering
£40.70 - MRP: £47.90
- Saving You: £7.20
-
Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Length 24.38 metres (continues...)
Also useful to keep pipes warmed
Completely safe in operation, simply fit a standard plug. Adhere to electrical safety procedures. The area of coverage will be between 2.80 to 4.44 square metres.
For a hotbed 69 - 95 Watts/sq.m. of heating will raise the temperature by 5 - 8 deg C For a propagator 95 - 130 Watts/sq.m will raise it by 8 - 11deg C. For additional temperature control use with a thermostatic controller.
Details and Ordering
£40.00 - MRP: £75.25
- Saving You: £35.25
-
NO STOCK - Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Length 4 (continues...)
NO STOCK - Used in the greenhouse border or in a sand bed, a soil warming cable can have a tremendous effect in promoting germination, striking cuttings or encouraging speedy early growth.
Also very useful in cold conditions to keep pipes warm etc
Completely safe in operation, simply fit a standard plug. Adhere to electrical safety procedures. The area of coverage will be between 4.64 to 9.29 square metres
For a hotbed 69 - 95 Watts/sq.m. of heating will raise the temperature by 5 - 8 deg C For a propagator 95 - 130 Watts/sq.m will raise it by 8 - 11deg C. For additional temperature control use with a thermostatic controller.
Details and Ordering
£104.00 - MRP: £130.00
- Saving You: £26.00
-
** NO STOCK - PLEASE DO NOT ORDER** Rod Thermostat with 300mm long tube sensor, for use with soil warming cables.
30 cm Rod Thermostat - Ideal for use with soil warming cables. Manufactured using polished aluminium rod. Fitted with a capillary thermostat which has a temperature range of between 0ºC to 40ºC. Housed in a grey plastic weatherproof (not waterproof) box.
Red neon indicator - mains on/off;
Amber neon indicator - appliance on/off;
Grey plastic cover with sealing gasket in lid.
Aluminium sensor rod 300mm long.
Specification:
Voltage -220/240 volt 50Hz;
Temperature range - 0 degree C to 40 degree C;
Heating -16 amp Resistive load/2.5 amp Inductive Load, maximum load 3Kw;
Cooling - 10 amp Resistive load/1.5 amp Inductive Load, maximum load 2kw.
Details and Ordering
£52.44 - MRP: £55.20
- Saving You: £2.76
-
**NO STOCK - PLEASE DO NOT ORDER** Rod thermostat with 450mm long tube sensor, for use with soil warming cables.
45 cm Rod thermostat. Ideal for use with soil warming cables. Manufactured using polished aluminium rod. Fitted with a capillary thermostat which has a temperature range of between 0ºC to 40ºC. Housed in a grey plastic weatherproof (not waterproof) box.
Red neon indicator - mains on/off
Amber neon indicator - appliance on/off
Grey plastic cover with sealing gasket in lid
Aluminium sensor rod 450mm long
specification:
Voltage -220/240 volt 50Hz
Temperature range - 0 degree C to 40 degree C
Heating -16 amp Resistive load/2.5 amp Inductive Load, maximum load 3Kw
Cooling - 10 amp Resistive load/1.5 amp Inductive Load, maximum load 2kw
Details and Ordering
£56.67 - MRP: £59.65
- Saving You: £2.98
-
**NO STOCK - PLEASE DO NOT ORDER** ROD THERMOSTAT with 600mm long tube sensor, for use with soil warming cables.
600mm Rod thermostat. Ideal for use with soil warming cables. Manufactured using polished aluminium rod. Fitted with a capillary thermostat which has a temperature range of between 0ºC to 40ºC. Housed in a grey plastic weatherproof (not waterproof) box.
Red neon indicator - mains on/off
Amber neon indicator - appliance on/off
Grey plastic cover with sealing gasket in lid
Aluminium sensor rod 600mm long
specification:
Voltage -220/240 volt 50Hz
Temperature range - 0 degree C to 40 degree C
Heating -16 amp Resistive load/2.5 amp Inductive Load, maximum load 3Kw
Cooling - 10 amp Resistive load/1.5 amp Inductive Load, maximum load 2kw
Details and Ordering
£58.71 - MRP: £61.80
- Saving You: £3.09
-
No STOCK - Adjustable air thermostat for both heating and cooling appliances
Air thermostat control to give accurate temperature control of both heating and cooling appliances. The sensor is clipped th the outside of the grey plastic weatherproof (not waterproof) box. This can be located up to 1500mm from the control box by pulling the capillary tube and securing with the spare retaining clip which is provided. Temperature adjustment control at front.
specification:
Voltage -220/240 volt 50Hz
Temperature range - 0 degree C to 40 degree C
Heating -16 amp Resistive load/2.5 amp Inductive Load, maximum load 3Kw
Cooling - 10 amp Resistive load/1.5 amp Inductive Load, maximum load 2kw
Details and Ordering
£67.25
Page printed from www.autogrow.co.uk